●
Although the ink systems that are supplied with this printer have good light-fastness, colors will
eventually fade or change if exposed to sunlight over a long period of time
●
If the paper type shown on the front panel does not correspond to the paper that you intend to use,
take one of the following actions:
◦
Reload the roll into the printer and select the correct paper type. See
Unload a roll from the printer
on page 33 and Load a roll into the printer on page 29.
◦
Use the Embedded Web Server or the HP Utility to reconfigure the paper type for the roll.
◦
At the printer's front panel, select the
icon, and then select View loaded paper > Change
paper type.
NOTE: The paper advance calibration is not performed when the paper type is changed from the
frnt panel.
Drying time
With some paper types and under certain environmental conditions, the ink needs some time to dry before
the paper is unloaded. The following settings are available for each paper type:
●
Automatic: the printer automatically determines the appropriate drying time, based on the paper you
have selected and the current temperature. If any drying time is required, a “drying time to go”
countdown appears on the front panel.
●
Extended: the default drying time is extended. This can be used if you find that the default drying time
is sufficient to dry the ink.
●
Reduced: the default drying time is reduced. This can be used if you want to get prints as fast as
possible, and you find that the reduced drying time causes no significant problem in your environment.
●
None: no drying time is provided. This can be used, for example, if you are manually removing the prints
as quickly as the printer is producing them.
●
Manual: this allows you to specify the drying time (in seconds).
To change the drying time, see
Change the drying time on page 36.
Supported paper types
The following table lists the most common HP paper types that are suitable for use with your printer, and
shows the name that you should select on the front panel when loading each paper type. If you want to use
an HP paper that does not appear on the front panel, go to
http://www.hp.com/go/designjet/supplies and
download the appropriate paper preset. You only need to download a preset once; the printer stores it for
future use and it subsequently appears in the front panel .
For the part numbers, widths, and weights of these papers, see
Order paper on page 37.
NOTE: This list is likely to change over the course of time. For the latest information, visit
http://www.hp.com/go/designjet/supplies/.
ENWW Overview 27
To Next Page
Loading...