The frequency with which cleaning is needed depends to some extent on the paper type in use.
●
For plain, coated or heavyweight coated paper, once a month may be sufficient.
●
For translucent, vellum, glossy or natural tracing paper, cleaning may be required once a week even
with the slowest print modes.
Move or store the stacker
Before moving or storing the stacker, take a couple of steps to reduce the amount of space it occupies.
1. Undo the screws at either side of the stacker tray, and let the tray hang vertically.
2. Remove the pin from each leg extension, and rotate the leg extension upwards.
72 Chapter 7 Use of the stacker ENWW
To Next Page
Loading...