You can select print-quality options in the following ways:
●
In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section. If you
select Standard Options, you will see a simple slider with which you can select speed or quality. If you
select Custom Options, you will see the more specific options described above.
●
In the Mac OS X 10.4 Print dialog: go to the Image Quality panel and look at the Quality Options
section. If you select Standard quality options, you will see a simple slider with which you can select
speed or quality. If you select Custom quality options, you will see the more specific options described
above.
●
In the Mac OS X 10.5 Print dialog: go to the Paper/Quality panel and look at the Quality Options
section. If you select Standard quality options, you will see a simple slider with which you can select
speed or quality. If you select Custom quality options, you will see the more specific options described
above.
●
On the Embedded Web Server's Submit Job page: select Basic settings > Print quality. If you then
select Standard options, you can choose between Speed and Quality. If you select Custom options,
you will see the more specific options described above.
●
Using the front panel: select the Setup menu icon
, then Printing preferences > Print quality.
NOTE: If you have set the print quality from your computer, that overrides the print-quality setting in
the front panel.
NOTE: You cannot change the print quality of pages that the printer is already receiving or has already
received (even if they have not started to print yet).
Print a draft
You can specify fast draft-quality printing in the following ways:
●
In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section. Move
the print-quality slider to the extreme left ('Speed').
●
In the Mac OS X 10.4 Print dialog: go to the Image Quality panel and move the print-quality slider to
the extreme left ('Speed').
●
In the Mac OS X 10.5 Print dialog: go to the Paper/Quality panel and move the print-quality slider to
the extreme left ('Speed').
●
On the Embedded Web Server's Submit Job page: select Basic settings > Print quality > Standard
options > Speed.
●
Using the front panel: select the Setup menu icon
, then Printing preferences > Print quality >
Select quality level > Fast.
You can specify even faster draft-quality printing by using EconoMode, as follows. This is intended mainly for
documents containing only text and line drawings.
●
In the Windows driver dialog: go to the Paper/Quality tab and look at the Print Quality section. Select
Custom Options, then set the quality level to Fast and check the EconoMode box.
●
In the Mac OS X 10.4 Print dialog: go to the Image Quality panel and set the quality options to Custom,
then set quality to Fast and check the EconoMode box.
78 Chapter 9 Print options ENWW
To Next Page
Loading...