HP Designjet Z3100 series Reference Guide

●
Mozilla 1.5 or later
●
Mozilla Firefox 1.0 or later
●
Safari
To access the Embedded Web Server on any computer, open your Web
browser and give the address of your printer. You can find out the address
of your printer (starting with http:) from the front-panel display, by looking
at the status screen.
If you have followed these instructions but failed to get through to the
Embedded Web Server, see Using your printer on DVD.
8 Chapter 2 Personalizing the printer ENWW
Personalizing the printer

HP Designjet Z3100 series Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	2400 x 1200 optimized dpi
Number of Inks	12
Ink Types	Pigment-based
Hard Disk	40 GB
Operating Systems Supported	Windows, macOS
Connectivity	USB 2.0, Ethernet
Media Handling	Roll feed
Print Languages	HP-GL/2, HP-RTL, CALS G4
Line Accuracy	+/- 0.1%
Dimensions (W x D x H)	1770 x 1047 mm
Media Sizes Supported	Up to 44 inches wide (roll), up to 42 x 60 inches (sheet)
Print Margin (roll)	5 mm (top), 5 mm (right), 5 mm (left), 5 mm (bottom)