HP Designjet Z3100 series Reference Guide

3 Paper handling
Choose which spindle to use
Ensure you use the correct spindle. The illustrations in the Load a roll onto
the spindle on page 9 procedure and the Load a roll into the printer
on page 12 procedure show the black spindle. You must use the gray
spindle if you are loading the following categories and types of rolled papers
wider than 36 in (91.5 cm).
Paper category Paper type
Bond and Coated Paper Plain Paper
Bond and Coated Paper Bright White Bond Paper
Bond and Coated Paper Coated Paper
Technical Paper Natural Tracing Paper
Technical Paper Translucent Bond
Technical Paper Vellum
Tip If you are a regular user of different paper types, you can
change rolls more quickly if you preload rolls of different paper types
on different spindles. Extra spindles are available for purchase,
see
Accessories on page 43.
Load a roll onto the spindle
WARNING! Ensure the sheet tray is closed.
ENWW
Choose which spindle to use
9
Paper handling

HP Designjet Z3100 series Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	2400 x 1200 optimized dpi
Number of Inks	12
Ink Types	Pigment-based
Hard Disk	40 GB
Operating Systems Supported	Windows, macOS
Connectivity	USB 2.0, Ethernet
Media Handling	Roll feed
Print Languages	HP-GL/2, HP-RTL, CALS G4
Line Accuracy	+/- 0.1%
Dimensions (W x D x H)	1770 x 1047 mm
Media Sizes Supported	Up to 44 inches wide (roll), up to 42 x 60 inches (sheet)
Print Margin (roll)	5 mm (top), 5 mm (right), 5 mm (left), 5 mm (bottom)