HP Designjet Z3100 series Reference Guide

1. Remove the right-hand end of the spindle from the printer, then the
other end.
WARNING! Do not insert your fingers into the spindle supports
during the removal process.
2. The spindle has a stop at each end to keep the roll in position. The
blue stop can be removed to mount a new roll; it slides along the
spindle to hold rolls of different widths. Remove the blue paper stop
from the end of the spindle.
10 Chapter 3 Paper handling ENWW
Paper handling

HP Designjet Z3100 series Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	2400 x 1200 optimized dpi
Number of Inks	12
Ink Types	Pigment-based
Hard Disk	40 GB
Operating Systems Supported	Windows, macOS
Connectivity	USB 2.0, Ethernet
Media Handling	Roll feed
Print Languages	HP-GL/2, HP-RTL, CALS G4
Line Accuracy	+/- 0.1%
Dimensions (W x D x H)	1770 x 1047 mm
Media Sizes Supported	Up to 44 inches wide (roll), up to 42 x 60 inches (sheet)
Print Margin (roll)	5 mm (top), 5 mm (right), 5 mm (left), 5 mm (bottom)