HP Designjet Z3100 series Reference Guide

5. Select your paper category and type.
Tip If you have loaded a paper type whose name does not
appear in the paper list (neither in the driver nor in the front
panel), you can choose a generic paper name instead. For
example, if you are loading HP Aquarella Art Paper or Epson
Smooth Fine Art Paper, and you don't find the exact name in
the paper list, you can choose Fine art paper.
6. Continue with step six of the easy loading process, skipping steps eight
and nine.
Tip When prints fall into the basket, they can be torn or get ink
marks from other prints. To avoid this, catch your prints as they are
cut from the roll and do not stack prints in the basket or turn off the
automatic cutter, see Using your printer on DVD, and use the Form
feed and cut key to release your print.
Unload a roll
Before unloading a roll, check whether there is paper on the roll or if the
roll is out of paper, and follow the appropriate procedure as described
below.
CAUTION Do not touch the paper while the printer is printing, as it
will cause image quality defects.
18 Chapter 3 Paper handling ENWW
Paper handling

HP Designjet Z3100 series Specifications

General

Print Technology	Thermal Inkjet
Maximum Print Resolution	2400 x 1200 optimized dpi
Number of Inks	12
Ink Types	Pigment-based
Hard Disk	40 GB
Operating Systems Supported	Windows, macOS
Connectivity	USB 2.0, Ethernet
Media Handling	Roll feed
Print Languages	HP-GL/2, HP-RTL, CALS G4
Line Accuracy	+/- 0.1%
Dimensions (W x D x H)	1770 x 1047 mm
Media Sizes Supported	Up to 44 inches wide (roll), up to 42 x 60 inches (sheet)
Print Margin (roll)	5 mm (top), 5 mm (right), 5 mm (left), 5 mm (bottom)