the Create a new form box, specify the name and dimensions of
the new form, then click Save Form.
●
Under Mac OS X 10.4, select Paper Size > Manage Custom Sizes
in the Page Setup dialog.
●
Under Mac OS X 10.2 or 10.3, select Settings > Custom Paper
Size from the Page Setup dialog.
Select margins options
By default, the printer leaves a 5 mm margin between the edges of your
image and the edges of the paper (17 mm at the foot of a sheet of paper).
However, you can change this behavior in several ways.
●
In the Windows driver dialog: select the Paper/Quality tab and then
the Layout button.
●
In the Mac OS Print dialog: select the Paper Type/Quality panel and
then Layout.
You will then see at least some of the following options.
NOTE
Under Mac OS, the available margins options depend on
the paper size selected in the Page Setup dialog. For instance, for
borderless printing you must select a paper size name that includes
the words “no margins”.
●
Standard. Your image will be printed on a page of the size you have
selected, with a narrow margin between the edges of the image and
the edges of the paper. The image should be small enough to fit
between the margins.
●
Oversize. Your image will be printed on a page slightly larger than the
size you have selected. If you cut off the margins, you will be left with
a page of the size you selected, with no margins remaining between
your image and the edges of the paper.
●
Clip Contents By Margins. Your image will be printed on a page of
the size you have selected, with a narrow margin between the edges
of the image and the edges of the paper. In this case, if the image is
the same size as the page, the printer assumes that the extreme edges
of the image are either white or unimportant, and do not need to be
ENWW
Select margins options
31
Printing
To Next Page
Loading...
Need help?
General
