NOTE
You cannot change the print quality of pages that the printer
is already receiving or has already received (even if they have not
started to print yet).
Select paper size
The paper size can be specified in the following ways.
NOTE
The paper size specified here should be the paper size in
which the document was created. It is possible to rescale the
document to a different size for printing. See Using your printer on
DVD.
●
In the Windows driver dialog: select the Paper/Quality tab, then
Document Size.
●
In the Mac OS Page Setup dialog: select your printer in the Format
for popup menu, then Paper Size.
●
Using the front panel: select the Setup menu icon
, then Printing
preferences > Paper > Select paper size. This option is available
only with the HP-GL/2 Upgrade.
NOTE
If you have set the paper size from your computer, that
overrides the paper size setting in the front panel.
To choose a non-standard paper size not shown in the list of paper sizes:
●
Under Windows, there are two different ways:
●
In the driver dialog, select Custom from the paper size list in
the Paper/Quality tab, then specify the paper dimensions, then
click Save to save your new paper size. To see your new custom
size in the list of custom sizes, you need to exit the printer
properties, then reenter them and use the More button.
●
From the Start menu, select Printers and Faxes, then from the
File menu select Server Properties. In the Forms tab, check
30 Chapter 4 Printing ENWW
Printing
To Next Page
Loading...
Need help?
General
