◦
Options > Rendering Intent: select Perceptual.
●
Click Print.
7. Choose driver settings.
●
Printer: select the printer (for example, HP Designjet Z3200ps Photo 24in).
●
Select Paper Type/Quality from the drop-down menu, then select the Paper tab.
◦
Paper Type: select the paper type that is currently loaded into the printer.
◦
Quality Options: select Standard and drag the slider to Quality.
●
Select the Color tab.
◦
Select Print in Grayscale.
TIP: If you experience bronzing with these options, see Bronzing on page 157.
◦
Under Color Management, select Printer Managed Colors, and then select Use Adobe
RGB (1998) from the source profile list.
●
Click Print.
Print a digital album (Aperture, PS driver)
This example uses Apple Aperture under Mac OS, with the PostScript driver. The color management is
done by Aperture.
1. Initial recommendations:
●
Choose an appropriate paper type for the purpose.
●
The paper type should be calibrated and profiled with the printer and the print-quality level
that you intend to use. See
Color calibration on page 69 and Color profiling on page 70.
●
For a correct preview of the printed image, the monitor should also be profiled.
2. Open Apple Aperture.
92 Chapter 6 Color management ENWW
Color management
To Next Page
Loading...