Service Utilities 147
Tests and Utilities
5. In the Disk Wipe DoD 5330.22-M submenu, scroll to “Disk Wipe DoD 5330.22-M” and press
Enter.
6. When the following message appears on the Front Panel, you must select whether you would like to
perform a complete erase of the Hard Disk Drive using the previously selected erase mode by
pressing Enter. Press Back or Cancel to exit the utility
7. When the following message appears on the Front Panel, you must select whether you want to
continue and completely erase of the Hard Disk Drive by pressing Enter. Press Back or Cancel to
exit the utility.
8. The erase process starts and the Front Panel shows the total time required to erase the Hard Disk
Drive using the selected Sanitize Level along with a progress bar.
To Next Page
Loading...