HP Designjet Z6100 Printer series

Entering the Service Calibrations Menu 153
Service Calibrations
Entering the Service Calibrations Menu
1. Once the message “Ready” is displayed on the front-panel, scroll to the “Printer Setup Options” icon
and press the Enter key.
2. Once inside the “Printer Setup Menus” menu, press the UP or Down arrow key and the Cancel
key together. You are now in the Service Tools Menu.
3. For On-Site Engineers, once inside the “Setup” menu, press the Up arrow key and the Cancel key
together. You are now in the Service Tools Menu.
4. Use the Arrow keys to scroll to the “Service Calibrations” menu and press the Enter key.
Press OK to
confirm selection
Use UP and
DOWN keys
to select
Press Cancel
key
P
HO
N
E
SUP
PO
R
T
Press DOWN
key
Press Cancel
key
O
N
-
S
I
T
E
RE
PA
I
R
Press UP key