300 Chapter 8 Removal & Installation
Removal & Installation
Service Station
Removal
1. Remove the Right Cover
⇒
See page 264
.
2. Primer Assembly
⇒
See page 294.
3. Primer Valves
⇒
See page 296.
4. Remove the Drop Detector
⇒
See page 309.
5. Remove the Right Connector Cover
⇒
See page 281.
6. Remove the Maintenance Cartridge
⇒
See the User’s
Guide.
7. Disconnect the cable from the Maintenance Cartridge
Door Switch.
8. Disconnect the Service Station and Aerosol Fan Cables
from the Interconnect PCA.
WARNING!: Switch off the printer and remove the power cable.
To Next Page
Loading...