336 Chapter 8 Removal & Installation
Removal & Installation
9. Remove the Carriage PCA from the Printer.
1. Power ON the Printer.
2. Execute the “Carriage Setup” Utility from the Service
Utility Menu (Refer to Chapter 4 for more information).
3. Install the Printheads once the Utility has been
completed successfully.
4. Reset life counter Carriage PCA
⇒
Chapter 4.
NOTE: Once you have installed a NEW Carriage PCA, you MUST perform the following steps to
ensure that the Printer will function correctly:
To Next Page
Loading...