OMAS Controller Card 363
Removal & Installation
5. Disconnect the OMAS Controller Card to OMAS
ribbon cable.
6. Disconnect the OMAS Controller Card to PrintMech
and Sausalito PCI connection cables.
7. Remove one T-10 screw (Type I) that secures the
OMAS Controller Card.
8. Disconnect the OMAS Controller Card from the Main
PCA and remove from the Printer.
CAUTION: To remove the OMAS Controller
Card without damaging it on the Emodule
cover, you will need disconnect it first and then
rotate it slightly in the direction indicated.
To Next Page
Loading...