Color Sensor Actuator Assembly 395
Removal & Installation
Color Sensor Actuator Assembly
Removal
1. Remove the Left Cover
⇒
See page 270
.
2. Remove the Left Spittoon
⇒
See page 328
.
3. Slide out the top row of Ink Cartridges from the Ink
Supply Station
4. Disconnect the Color Sensor Actuator Assembly.
5. Remove one T-15 screw (Type G) that secures the
Color Sensor Actuator Assembly to the printer.
WARNING!: Switch off the printer and remove the power cable.
To Next Page
Loading...