444 Chapter 8 Removal & Installation
Removal & Installation
Take-Up Reel Left Hand Module
Removal
1. Close the Paper Bin (if open).
2. Remove one rear T-20 screws that attaches the Take-Up
Reel Left Hand Module to the Left Leg Assembly.
3. Loosen the two front T-20 screws that attach the Take-
Up Reel Left Hand Module to the Left Leg Assembly.
4. Lift the Take-Up Reel Left Hand Module sufficiently so
you can remove it from the Left Leg Assembly.
WARNING!: Switch off the printer and remove the power cable.
To Next Page
Loading...