Preventive Maintenance 455
Preventive Maintenance
number Q6715A (HP Designjet Z6100 User Maintenance Kit).
Cleaning Procedure
1. From the Customer Preventative Maintenance Kit use the cloth shown.
2. Make sure that the printer is idle and that Carriage Assembly is in the area of the Service Station on
the right side of the printer.
3. Wet the cloth with tap water (1)and remove any excess water (2).
4. Open the Printer Window.
NOTE: When the message is displayed on the Front Panel, a ‘silent’ warning message is
added within the system error log ‘8:01’. This helps when reviewing the error log history, to see
if the message has been displayed.
To Next Page
Loading...