HP Designjet Z6100 Printer series - Page 65

Continuable and Non-Continuable Error Codes 55
System Error Codes
• Replace the Ink Supply Tubes and Trailing Cable ⇒ Page 312.
System Error:
26.3:01
Problem Description:
Bad contact detected in ISS slot 3 floater.
Corrective Action:
Try the following:
• Remove the Matte Black Ink Cartridge and reinstall it in to the Printer.
• Replace the Matte Black Ink Cartridge.
• Check that the ISS to Cartridge cable (Matte Black Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
• Replace the ISS to Cartridge cable (Matte Black Ink Cartridge) ⇒ Page 318.
• Replace the Ink Supply Tubes and Trailing Cable ⇒ Page 312.
System Error:
26.4:01
Problem Description:
Bad contact detected in ISS slot 4 floater.
Corrective Action:
Try the following:
• Remove the Yellow Ink Cartridge and reinstall it in to the Printer.
• Replace the Yellow Ink Cartridge.
• Check that the ISS to Cartridge cable (Yellow Ink Cartridge) is not damaged and is correctly
connected to the Ink Supply Tubes PCA.
• Replace the ISS to Cartridge cable (Yellow Ink Cartridge) ⇒ Page 318.
• Replace the Ink Supply Tubes and Trailing Cable ⇒ Page 312.
NOTE: If the Ink Supply Tubes are to be replaced, the Ink Cartridges need to be checked
beforehand to see if they are capable of purging the new tubes, if they are not, new Ink
Cartridges must also be sent with the parts to be replaced. To check the Ink Cartridges go to ⇒
Page 129.
NOTE: If the Ink Supply Tubes are to be replaced, the Ink Cartridges need to be checked
beforehand to see if they are capable of purging the new tubes, if they are not, new Ink
Cartridges must also be sent with the parts to be replaced. To check the Ink Cartridges go to ⇒
Page 129.
NOTE: If the Ink Supply Tubes are to be replaced, the Ink Cartridges need to be checked
beforehand to see if they are capable of purging the new tubes, if they are not, new Ink
Cartridges must also be sent with the parts to be replaced. To check the Ink Cartridges go to ⇒
Page 129.