NOTE: A label on the spindle also shows the correct winding
direction.
5.
Put the blue hub on to the upper end of the spindle, and push it towards the end
of the roll as shown in step 1 in the following image. Then slide the lever-lock
to the locked position as shown in step 2.
6.
With the blue hub on the left, insert the spindle into the left side of the printer
(1), and then into the right side of the printer (2).
If you regularly use different paper types, you can change rolls more quickly if you
pre-load rolls of different paper types on different spindles. Extra spindles are
available for purchase.
10 Chapter 2 Handle the paper
Handle the paper
To Next Page
Loading...
