Load a roll into the printer
NOTE: To start this procedure, you need to have a roll loaded on the
spindle. See
Load a roll onto the spindle on page 9.
1.
At the printer's front panel, select the
icon, and then select Paper load
> Load roll.
2.
Wait until the front panel prompts you to open the printer window.
After you have opened the printer window, lift the paper-load lever.
3.
Pull out approximately 1 m (3 feet) of paper.
4.
Carefully insert the leading edge of the roll above the black-ribbed roller.
Wait until the paper emerges from the printer.
Load a roll into the printer
11
Handle the paper
To Next Page
Loading...
