3. Remove the Primer Valves See Primer Valves on page 249.
4. Remove the Drop Detector
See Drop Detector on page 262.
5. Remove the Right Connector Cover
See Right Connector Cover on page 238.
6. Remove the Maintenance Cartridge
See the User’s Guide.
7. Disconnect the cable from the Maintenance Cartridge Door Switch.
8. Disconnect the Service Station cable (labelled “SS and DD”) from the Interconnect PCA.
9. Unroute the Service Station cable.
ENWW
Disassembly order
253
Removal and
installation
To Next Page
Loading...
