HP DESIGNJET Z6800

Scenario 1
Reprint a job with consistent colors by using the same printer.
To ensure color consistency when reprinting the job, use the same paper type.
1. Check that the color calibration is valid for the paper type that is loaded. On the front pane, select the
icon, and then select View loaded paper. In the Paper information window, check that Color
Calibration is OK. If the status of the Color Calibration is Pending or Recommended, perform a color
calibration from the HP Color Center, or on the front panel.
2. Reprint a job: Through the Embedded Web Server, go to the Job queue, select the job you want to
reprint, and then click the Reprint button.
A file can also be printed again if was stored in the printer. Through the Embedded Web Server, go to
Stored jobs in printer, select the job you want to print, and then click the Print button.
Scenario 2
Reprint a job by using two HP Designjet Z6800 printers.
To ensure color consistency when reprinting the job, use the same paper type.
ENWW Reprint a job with consistent colors 133