7. The printer knows if the type of paper that is loaded is suitable for the automatic paper-cutter. The
paper is cut if it is suitable. If the paper is not suitable, cut the paper manually.
NOTE: The automatic paper-cutter feature is disabled for some of the heaviest paper types, because
they can damage the cutter.
8. Use the winding button on the take-up reel motor to wind the remainder of the paper around the take-
up reel spindle.
9. Press the OK key on the front panel.
The amount of printed paper that is on the take-up reel spindle appears on the front panel.
10. Unlock the take-up reel spindle by pushing the spindle lever to its uppermost position.
42 Chapter 4 Handle the paper ENWW
To Next Page
Loading...