HP DeskJet 930C User Manual

1
1
Printing Basics
Buttons and Lights
The HP DeskJet printer buttons (shown below) let you turn the printer on and off,
cancel a print job, or resume printing. The lights give you visual cues about the
state of your printer. The buttons and lights from left to right are:
Cancel Button – Press this button to
cancel the current print job.
Print Cartridge Status Light – When
lit, the light above this symbol indicates that
you need to check the status of your print
cartridges. See “Print Cartridge Status” on
page 25 for more information.
Resume Button and Light – When
this light flashes an action is needed such as
load paper or clear a paper jam. To
continue printing, press the Resume Button.
See “What do the flashing lights mean?” on
page 40.
Power Button and Light – Use the Power Button to turn the printer on and
off. When the green light above the Power Button flashes, printing is in progress.
Always use the Power Button on the front of the printer to turn the printer
on and off. Using a power strip, surge protector, or a wall-mounted switch
to turn the printer on and off may cause premature printer failure.
Warning

HP DeskJet 930C Specifications

General

Monthly Duty Cycle	Up to 1000 pages
Ink Cartridge	HP 45 Black, HP 78 Tri-color
Print Resolution	2400 x 1200 dpi
Print Speed Black	9 ppm
Media Sizes Supported	A4, A5, B5, DL envelope
Connectivity	Parallel, USB
Paper Handling Input	Input tray
Input Capacity	100 sheets
Print Technology	Ink-jet - color