To Next PageTo Next Page
Need help?Do you have a question about the HP DL120 and is the answer not in the manual?
General| Product Line | ProLiant |
|---|---|
| Rack Height | 1U |
| Processor Type | Intel Xeon |
| Memory Type | DDR3 |
| Maximum Memory Capacity | 32GB |
| Number of Processors Supported | 1 |
| Hard Drive Interface | SATA |
| Storage | Up to 4 LFF |
| Expansion Slots | 1 x PCIe |
| Server Type | Rack Server |
Identifies front panel components for SFF and LFF models.
Lists and identifies rear panel components of the server.
Identifies and lists various components on the server's system board.
Shows the layout and numbering of DIMM slots on the motherboard.
Steps to safely shut down and power off the server.
Procedure for safely removing the server from a rack.
Steps to remove the server's access panel.
Procedure for installing the PCIe riser board assembly.
Details server spacing and airflow needs for proper cooling.
Outlines electrical requirements and safety guidelines for power.
Steps for mounting the server into a rack.
Procedures for powering on and initial server configuration.
Details server memory support, types, and configurations.
Information on available hard drive options and controllers.
Procedure for installing a hot-plug compatible hard drive.
Guide for installing and enabling a Trusted Platform Module.
General guidelines for routing server cables.
Illustrates SATA cable connections for LFF and SFF models.
Illustrates SAS cable connections for LFF and SFF models.
Describes SmartStart for server deployment and configuration.
Details the RBSU utility for system configuration.
Overview of various management tools like ASR, ROMPaq, and iLO 3.
Details HP SUM for firmware and software deployment.
Essential steps to take before starting server diagnosis.
Information to collect about symptoms before troubleshooting.
Overview of diagnostic flowcharts for problem solving.
Flowchart for diagnosing power-on issues.
Warnings and guidelines for battery handling and replacement.
FCC compliance statements for Class A and B devices.
EU directives and CE marking compliance.
Safety and compliance information for laser products.
Steps to avoid damaging components with static electricity.
Various grounding techniques for handling sensitive parts.
Operating and storage environmental ranges for the server.
Physical dimensions and weight of the server.
Details on the server's power supply input and output.
Information to have ready when contacting HP technical support.
Ways to contact HP technical support and find resellers.
Details on HP's Customer Self Repair program for parts.
