Operations 20
CAUTION: For proper cooling do not operate the server without the access panel, baffles,
expansion slot covers, or blanks installed. If the server supports hot-plug components, minimize
the amount of time the access panel is open.
1. Power down the server (on page 17).
2. Remove the access panel ("Removing the access panel" on page 18).
CAUTION: Do not detach the cable that connects the battery pack to the cache module.
Detaching the cable causes any unsaved data in the cache module to be lost.
3. Remove the air baffle.
To replace the component, reverse the removal procedure.
To Next Page
Loading...
