Removal and replacement procedures 60
2.
Remove the slot cover(s) on the PCI cage.
CAUTION: Do not discard the slot cover. If the expansion board is removed in the future, the slot
cover must be reinstalled to maintain proper cooling.
Figure 48 Removing the slot cover (1)
Figure 49 Removing the slot cover (2)
To install the PCI card:
1. Slide the expansion board into the slot, aligning the board with its matching connector.
Firmly press the board to seat it properly on the slot.
2. Tighten the screw that secures the card to the PCI cage.
To Next Page
Loading...
