7–2 Power
Battery packs
Inserting or removing a battery pack
Ä
CAUTION: To prevent loss of work when removing a battery pack that
is the sole power source, initiate hibernation or turn off the computer
before removing the battery pack.
✎
Battery packs may vary in appearance.
To insert a battery pack:
1. Turn the computer upside down on a flat surface.
2. Insert the battery pack 1 into the battery bay and rotate it
down 2 until it is seated.
The battery pack release latch automatically locks the battery
into place.
To Next Page
Loading...
Need help?
General