-330,"Self-test failed; missing
Frat.-N
chip sweep interrupt"
Triggered by: *tst? command This
is
a hardware fault. Please report
error and returned value from *TST? command to service personnel.
-330,"Self-test failed; Operating system timer interrupt missing"
Triggered by: *TST? command. The lOms timer interrupt for the
operating system is not detectable. This is a hardware fault. Please
report error and returned value from
"TST? command to service
personnel.
-330,"Self-test failed; Operating system timer period time too high"
Triggered by: *TST? command. The period of the 10 ms opsys timer
is significantly greater than 10 ms. This
is
a hardware fault. Please
report error and returned value from 'TST? command to service
personnel.
-330,"Self-test failed; Operating system timer period time too low"
Triggered by: 'TST? command. The period of the 10 ms opsys timer
is significantly less than 10 ms. This is a hardware fault. Please
report error and returned value from *TST? command to service
personnel.
-330,"Self-test failed; Sweep timer interrupt missing"
Triggered by: *TST? command. The
1
ms timer interrupt derived
from frac-n reference clock is not detectable. This is a hardware
fault. Please report error and returned value from *TST? command
to service personnel.
-330,"Self-test failed; Sweep timer period time too high"
Triggered by: *TST? command. The period of the
1
ms sweep timer
is significantly greater than
1
ms. This is a hardware fault. Please
report error
arid
returned
value
from
*TST?
command
to
service
personnel.
-330,"Self-test failed; Sweep timer period time too low"
Triggered by: *TST? command. The period of the
1
ms sweep timer
is significantly less than
1
ms. This is a hardware fault. Please report
error and returned value from *TST? command to service personnel.
-330,"Self-test
failed;
RAM
test
failed5'
Triggered by: *TST? command. This is a hardware fault. Please
report error and returned value from *TST? command to service
personnel.
-330,"Self-test failed;
ROM
test failed"
Triggered by: *TST? command. This is a hardware fault. Please
report error and returned value from *TST? command to service
personnel.
Error
Messages
E-7
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
