HP EliteBook 2730p - Page 84

5–8 Maintenance and Service Guide
Computer Setup
Port Options (all are enabled by default)
✎
All port options are enabled by default.
■ Enable/disable the Smart Card slot.
■ Enable/disable the ExpressCard slot.
■ Enable/disable the serial port.
■ Enable/disable the parallel port.
■ Enable/disable the flash media reader.
■ Enable/disable the USB port.
Ä
Disabling the USB port also disables MultiBay devices and ExpressCard
devices on the advanced port replicator.
■ Enable/disable the 1394 port.
AMT Options (all are disabled by default)
✎
All AMT options are disabled by default.
■ Enable/disable Firmware Verbosity.
■ Enable/disable AMT Setup Prompt (CTRL-P).
■ Enable/disable USB Key Provisioning Support.
■ Enable/disable Unconfigure AMT on Next Boot.
■ Enable/disable Terminal Emulation Mode.
■ Enable/disable Firmware Progress Event Support.
■ Enable/disable Include TYPE-131 in SMBIOS.
Set Security Level Change, view, or hide security levels for all BIOS menu items.
Restore Security Defaults Restore the default security settings.
Select To do this