HP EliteBook 820 G3 - Page 30

QuickSpecs
HP EliteBook 820 G3 Notebook PC
HP EliteBook 840 G3 Notebook PC
HP EliteBook 850 G3 Notebook PC
Features
Not all configuration components are available in all regions/countries.
c04688005 – DA 15295 – World Wide – Version 1 – December 9, 2015
Page 30
HP Fingerprint Reader
(optional)
Mobile Voltage Operation
3.0V-3.6V
Operating Temperature
14° – 167°F (-10° – 75°C)
Current Consumption
Image
36 mA peak
Low Latency Wait for
Finger
950 uA
Capture Rate
59000 lines/sec
ESD Resistance
IEC 61000-4-2 4B (±15KV)
Detection Matrix
200*1 (plus another secondary line)
508 dpi
10*1 mm sensor area
Smart Card Reader
Smart card standard
PC/SC 2.0 for Windows smart card standard
Dimensions (L x W x H)
0.41x 0.08 x 0.32 in (10.5 x 2 x 8.2 mm)
Smart Card support
ISO 7816 Class A and AB smart cards
Smart Card Interface
Smart Card Interface with T = 0 and T = 1 support
Support I2C memory card, SLE4418, SLE4428, SLE4432, SLE4442, SLE4436,
SLE5536, SLE6636, AT88SC1608, AT45D041 card and AT45DB041 card via
external EEPROM
Operating systems
No driver is required for this device. Native support is provided by the operating
system.
Power
Normal Mode
With card present, before being suspended: 40.9 mA
Without card present, before being suspended: 33.16 mA
After being suspended with smart card present: 380 μA
After being suspended without smart card present: 380 μA
Power Saving
Mode
With card present, before being suspended: 40.6 mA
Without card present: 380 μA
After being suspended with smart card present: 380 μA