16. If it is necessary to replace the camera cable:
Camera cables are available in the Cable Kit as spare part number L60602-001 in models without a
privacy display and L72085-001 in models with a privacy display.
a. HD camera models
Disconnect the cable from the camera (1), and then remove the cable from the display enclosure
(2).
b. IR camera models
Disconnect the cable from the ambient light sensor board (1), from the left (2) and right (3) sides
of the IR camera, and then remove the cable from the display enclosure (4).
The camera cable is available in the Cable Kit as spare part number L60602-001 in models without a
privacy display and L72085-001 in models with a privacy display.
72 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
