6. To remove the display bezel:
a. Flex the inside edges of the bottom edge (1), the left and right sides (2), and the
top edge (3) of the display bezel until the bezel disengages from the display enclosure.
b. Remove the display bezel (4). The display bezel is available using spare part number
702860-001 on models with a webcam and 702861-001 on models without a webcam.
NOTE: For this procedure the display will not be connected to the computer as shown in
the following image.
7. To remove the display panel:
NOTE: For this procedure the display will not be connected to the computer as shown in the
following images.
a. Remove the four Phillips PM2.0×3.0 screws that secure the display panel to the
display enclosure.
Display panels are available using the following spare part numbers:
●
702871-001 — 35.6-cm (14.0-in), LED, HD, AntiGlare display panel
●
708771-001 — 35.6-cm (14.0-in), LED, HD+, AntiGlare display panel
80 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
