8. If it is necessary to replace the display hinges:
Display hinge covers and hinges are available in the Display Hinge Kit, spare part number
702857-001.
a. Remove the Phillips broadhead PM2.0×2.5 screw (1) that secures each hinge cover to the
display enclosure.
b. Remove the display hinge covers (2) from atop the hinges.
c. Remove the 2 broadhead Phillips PM2.0×2.5 screws (1) that secure each display hinge to
the display enclosure.
82 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
