b. Disconnect the cable (2) from the webcam/microphone module, and then remove the webcam
module from the display enclosure (3).
The webcam module is available using spare part number 790068-001.
4. If it is necessary to replace the display panel:
a. Remove the six Phillips PM2.0×1.8 screws that secure the display panel to the display enclosure
(1), and then rotate the top of the display panel downward (2) onto the keyboard.
Display panels are available using the following spare part numbers:
●
790071-001 — 31.75-cm (12.5-in) QHD raw display panel, non-touch
●
790070-001 — 31.75-cm (12.5-in) FHD raw display panel, non-touch
36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
To Next Page
Loading...
