Inserting a SIM card (select products only)
CAUTION: To prevent damage to the connectors, use minimal force when inserting a SIM card.
To insert a SIM card, follow these steps:
1. Turn o the computer by using the Shut down command.
2. Insert the SIM card into the SIM card slot, and then press in on the SIM card until it is rmly seated.
NOTE: The SIM card in your computer may look slightly dierent from the illustration in this section.
NOTE: See the image next to the slot to determine which way the SIM card should be inserted into your
computer.
To remove a SIM card, press in on the SIM card, and then remove it from the slot.
18 Chapter 2 Components ENWW
To Next Page
Loading...
