To Next Page

To Previous Page

2 Setting Up the Monitor

To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other

attached devices, then follow the instructions below.

Unfolding the Monitor Pedestal Base

1. Lift the monitor from its box and place it face down on a flat surface.

2. Hold down the monitor base with one hand (1) then grasp the top of the stand with the other

hand and unfold the display head 90 degrees (2).

CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-

uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover to its

normal condition.

NOTE: When the monitor is unfolded for the first time, the display head is locked from adjusting to a

full-height position. To adjust the display head to full height, press down on the display head to unlock

it then pull up on the display head to raise it to the full-height position. Refer to step 3 in

Adjusting the

Monitor on page 13.

ENWW Unfolding the Monitor Pedestal Base 3

Questions and Answers:

Need help?

Do you have a question about the HP EliteDisplay S231d and is the answer not in the manual?

HP EliteDisplay S231d Specifications

General

3D	-
Pixel pitch	0.265 x 0.265 mm
Display diagonal	23 \
Display technology	LED
Vertical scan range	50 - 60 Hz
Horizontal scan range	24 - 80 kHz
Viewable size, vertical	286.4 mm
Contrast ratio (dynamic)	5000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewable size, horizontal	509 mm
Display brightness (typical)	250 cd/m²
HDCP	Yes
USB hub version	3.2 Gen 1 (3.1 Gen 1)
HDMI ports quantity	0
USB Type-A downstream ports quantity	2
Product color	Black
Country of origin	China
Market positioning	Business
Tilt angle range	-5 - 30 °
Panel mounting interface	100 x 100 mm
AC input voltage	100 - 240 V
Power consumption (standby)	2.2 W
Power consumption (typical)	38 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions