HP EliteOne 800 G1

Supply Operating voltage 2.97 to 5.25 Volts
I/O Voltage 1.8V or 3.3V
Power Consumption (Supply 3.3
Volts)
Mode Power Consumption, Typical
2
Reset 10 µW
Standby 150 µW
Card Emulation within Polling Loop 297 µW
When generating RF 120 mW
Transmitter Supply Current (Continuous wave) 30 mA
Antenna Antenna connector, 0.5mm pitch, 5 connector FPC. Antenna matching is external to module.
1
With application or UICC support
2
Actual Power Consumption is dependent on NFC antenna and matching circuit and on the particular polling sequence and
period configured.
QuickSpecs
HP EliteOne 800 G1 All-in-One Business PC
Technical Specifications - Communications
DA - 14652 North America — Version 13 — November 11, 2013 Page 38