15. Remove the three Phillips head screws that secure the printer engine to the bottom of the column.
IMPORTANT: Do not remove any screws marked with 'P' on the base plate.
16. Slide the printer engine about ¼ inch (0.6 cm) out of the column (1).
17. Carefully remove the paper feed button from the opening in the column (2).
18. Continue sliding the printer engine out of the column and remove (3).
To replace the column printer, reverse the removal procedures. Please note the following tips when replacing
the column printer.
●
Remove the alignment pin from the bottom of printer engine.
Removing and replacing the column printer 39
To Next Page
Loading...
