Connecting an AC adapter to power
To connect an AC adapter to the I/O connectivity base, connect one end of the power cord to the AC adapter (1)
and the other end to a grounded AC outlet (2), and then connect the AC adapter to the power connector on the
I/O connectivity base (3).
To connect an AC adapter to the computer when it is not connected to an I/O connectivity base, connect the AC
adapter to a grounded AC outlet (1), and then the connect the power adapter’s USB Type-C connector to the
USB Type-C power port on the underside of the stand or stability base (2).
NOTE: The image below is shown with a stability base.
6 Chapter 1 Product overview
To Next Page
Loading...
