d. Remove the display hinges (2).
The display hinges are available using spare part number 809299-001.
8. If it is necessary to replace the antenna:
a. Remove the display back cover.
b. Release the antenna cables from the retention clips (1) and routing channel built into the top and
right edges of the display back cover.
c. Detach the antenna transceivers from the display back cover (2). (The antenna transceivers are
attached to the display back cover with double-sided adhesive.)
d. Remove the antenna.
The antenna are available using spare part number 843588-001.
HP
Condential
Component replacement procedures 55
To Next Page
Loading...
