5-157
Hardkey and Softkey Reference
Sweep/List
Load From Selected File
Press this softkey to load the list sweep data from a file into the current sweep list.
Use the arrow keys to highlight the desired sweep list file. Press
Load List From
Selected File and the list sweep data from the selected file is loaded into the
current list sweep. You can only have one list sweep at a time so the existing list
sweep data will be lost unless it is first stored to a file. This softkey is inactive
unless at least one list sweep data file has been stored to memory.
Softkey Location: Press
Sweep/List, Configure List Sweep, More (1 of 2),
Load/Store, Load From Selected File
SCPI Commands:
:MEMory:LOAD:LIST <filename>
:MMEMory:LOAD:LIST <filename>
Load List From Step Sweep
Press this softkey to eliminate the existing sweep list data and replace it with the
step sweep data points. You can only have one sweep list at a time so be certain
that you wish to delete the existing list. You cannot recover the sweep list data
once you press
Load List From Step Sweep.
Softkey Location: Press
Sweep/List, Configure List Sweep, More (1 of 2),
Load List From Step Sweep
Load/Store
Pressing this softkey reveals a menu of choices for storing list sweep data to a file
or loading list sweep data from a file into the current sweep list. In this menu you
can also delete existing list sweep files.
Softkey Location: Press
Sweep/List, Configure List Sweep, More (1 of 2),
Load/Store
To Next Page
Loading...
Need help?
General
