Safety and Maintenance Guidelines
User’s Guide 2–7
To prepare the f monitor for shipping:
1. Disconnect the power, video, and audio cables from the
monitor.
2. Push the panel straight down to flatten the hinge 1, as shown
in the following illustration. Place the strap that came with the
monitor around the base by threading it through the hinge 2.
Rotate the front of the panel down to a horizontal position 3.
Avoid applying pressure to the LCD screen, doing so can
cause damage.
Folding the f monitor for shipping
Å
WARNING: Do not lay the LCD panel of the monitor on a flat
surface while trying to attach the strap to the monitor base. The
hinge of the base can spring suddenly and this could cause
damage or injury.
3
2
1
To Next Page
Loading...
