Operating the Monitor
User’s Guide 4–13
Selecting the Video Input Connectors
The two input connectors are:
■ VGA connector (analog)
■ DVI-D connector (digital) (f monitor, select models only)
The monitor automatically determines which inputs have valid
video signals and displays the image. The video input can be
manually selected through the OSD feature or selected using the
monitor buttons by pressing the
– (Minus) button for DVI input or
the
+ (Plus) button for VGA input.
Ä
CAUTION: Image retention may occur on monitors that display the
same static image on screen for a prolonged period of time. To
avoid image retention on your monitor screen, you should always
use a screen saver application or turn off the monitor when it is not in
use for a prolonged period of time.
To Next Page
Loading...
