Setting Up the Monitor
User’s Guide 3–5
Ä
CAUTION: The screen is fragile. Placing the monitor screen down
on a flat, soft area prevents scratches, defacing, or breakage.
2. Remove the hinge cover 1 as shown in the following
illustration, and set it aside. Three screws and the hinge are
exposed.
3. Holding the pedestal so it cannot fall, use a magnetic
screwdriver to remove the single screw close to the hinge, and
then remove the other two screws 2. If necessary, move the
pedestal so that all three screws are accessible.
4. Slide the pedestal off the monitor panel 3.
Wall-mounting the vs monitor
1
2
3
To Next Page
Loading...
