Operating the Monitor
4–4 User’s Guide
To use the auto-adjustment feature:
1. Allow the monitor to warm up for 20 minutes before adjusting.
2. Press the Auto/Select button on the monitor front panel.
❏ You can also press the Menu button, then select
Auto-Adjustment from the OSD Main Menu. See
“Adjusting Monitor Settings” in this chapter.
❏ If the result is not satisfactory, continue with the procedure.
3. Insert the CD in your computer’s CD-drive. The CD menu
launches.
4. Select Open Auto-Adjustment Software.
5. The setup test pattern displays.
Auto-adjustment setup test pattern
6. Press the Auto/Select button on the monitor front panel to
produce a stable, centered image.
To Next Page
Loading...
