Do you have a question about the HP F2200 and is the answer not in the manual?
Lower paper tray, open cartridge door, and remove all packing material from the device.
Check box contents, purchase USB cable if needed, and connect power cord. Do not connect USB cable yet.
Close cartridge door, open paper tray, extend tray and guide, and load plain white paper.
Turn on the printer, wait for carriage movement, remove tape from cartridges, and insert them into the carriage.
Close cartridge door, print alignment page, place it on glass, close lid, and press Scan button.
Install software using CD for Windows/Mac and connect the USB cable as prompted.
Cancel screens, unplug USB, insert software CD to resolve Microsoft Add Hardware issues.
Unplug and replug printer, check connections, and ensure USB is not connected to keyboard or hub.
| Print Technology | Inkjet |
|---|---|
| Functions | Print, Copy, Scan |
| Print Speed (Black) | Up to 20 ppm |
| Scanner Type | Flatbed |
| Copy Speed (Black) | Up to 20 cpm |
| Connectivity | USB 2.0 |
| Duplex Printing | Manual (driver support provided) |
| Scan Resolution | 1200 x 2400 dpi |
| Media Sizes Supported | 4 x 6 in, 5 x 7 in, 8 x 10 in |
| Operating System Compatibility | Windows, Mac |
| Print Resolution | Up to 4800 x 1200 optimized dpi |












Loading...