HP Flex-10 10Gb 2-port 552M - Technical Specifications; General Specifications; Power and Environmental Specifications; Agency Approvals

General Specifications Network processor Emulex BE3
Data rate Two ports, each at 20 Gbps full duplex; 40 Gbps aggregate full duplex
theoretical bandwidth.
Onboard memory 128MB
Bus type PCI Express v2.0 (Gen 2) x8
Form factor Type A Mezzanine Card
IEEE Compliance 802.1p, 802.1q, 802.1qau, 802.3ad, 802.3ae, 802.3ap (10GBase-KX4), and,
802.3x
Power and Environmental
Specifications
Operating Temperature 0°C to 55°C / 32°F to 131°F
Humidity 10% to 90% non-condensing
Power requirement 8.6W idle and 10W maximum
Emissions classification FCC Class A
Agency approvals USA FCC (CFR 47 part 15) and UL 60950
Canada ICES-003 and CSA60950
Japan VCCI
Korea MIC (RRL), EMC Registration
Australia ACA, AS/NZS3548/EN55022:1998, EN55024:1998
European Union EN55022:1998 (CISPR 22), EN55024:1998, and
IEC60950:1999 (EN60950:2000)
RoHS Compliance 6 of 6
Safety UL Mark (USA and Canada)
CE Mark
EN 60590
Operating System
Support
Microsoft :
Microsoft Windows Server 2008 SP2, R2 (x86 and x64)
Microsoft Windows Hyper-V, R2 SP1
Linux :
RHEL 5, 6, 7
SLES 10, 11
Solaris :
Solaris 10 (x86 and x64)
Virtualization :
VMware ESX 4, ESX 5.0
NOTE: For more operating system support & certification information, please visit:
http://h10018.www1.hp.com/wwsolutions/index.html .
QuickSpecs
HP Flex-10 10Gb 2-port 552M Adapter
Technical Specifications
DA - 14218 Canada — Version 6 — April 18, 2014 Page 8