HP HP-15C - Example: Flags

Section3: Calculating in Complex Mode 93
To use this program:
1. Enter your subroutine labeled "B" into program memory. It
should place into the real X-register Im(P(2)) when
calculating streamlines or Re(P(2)) when calculating
equipotential lines.
2. Press 6 Q] |DIM| I7JJ1 to reserve registers R0 through R6 (and the
Index register). (Your subroutine may require additional
registers.)
3.
4.
Enter the values of n and h into the Z- and Y-registers by
pressing n | ENTER] h | ENTER | .
Enter the complex value of z0 = XQ
by pressing x0 1 ENTER) y0 BJ E •
iy0 into the X-registers
5. Press Q] [A] to display the successive values of x^ and y^ for
k = 1, ..., n and finally the descriptor of matrix A. The values
for k = 0, ..., n are stored in matrix A.
6. If desired, recall values from matrix A.
Example: Calculate the streamline of the potential P(z) — 1/2 + 2
passing through 2 = -2 + O.lz.
First, enter subroutine "B" to compute Im(P(2)).
Display
062-42,21,12
063- 36 Duplicates 2.
064- 15
065- 40 Calculates 1/2+ 2.
066- 4230 Places Im(P(2)) in X-
register.
067- 43 32
Determine the streamline using 20 — -2 + 0.1 z, step size h = 0.5, and
number of points n = 9.
Display
9.0000
0.5000
Run mode.
Enters n.
Enters h.